Single Exhaust Bellows For Wartsila* Diesel Engine Exhaust

wartsila
exhaust bellows
diesel_engine_exhaust

NOTE-
1. L = INSTALLATION LENGTH = 280 mm FOR ALL
2. N = NUMBER OF HOLES OF ød ON FLANGES
3. FLANGES ACCORDING TO DIN2501 ND 2.5/ ONE SIDE ROTATING FLANGE
4. Fa = AXIAL SPRING RATE
5. Fr = LATERAL SPRING RATE
6. APPLICATION – FOR EXHAUST GAS PIPES
7. WORKING PRESSURE = 0.5 bar ( 0.05 MPa PRESSURE ABOVE ATMOSPHERE)
8. TEST PRESSURE = 1.5 bar ( 0.15 MPa PRESSURE ABOVE ATMOSPHERE)
9. WORKING TEMPERATURE = 450°C
10. MATERIAL BELLOWS AND SLEEVE – AISI-321

FLANGES – St 37

* FOR HIGHER SIZES PLEASE CONTACT OUR DESIGN DEPARTMENT WITH THE DETAIL SPECIFICATIONS

*Wartsila is the registered trademark of Wartsila NSD. The parts listed herein and or sold by Flexpert Bellows Private Limited are not original manufacturers parts. All original equipment manufacturers names, model numbers,trademarks, part descriptions and the drawings shown here are for identification purpose only.Flexpert Bellows Private Limited implies no affiliation or sponsorship with any equipment manufacturer.